ADTRAN AOS Version R10.1.0 Command Reference Manual page 3409

Command Reference Guide
assistant-extension <number>
Use the assistant-extension command to tie an assistant's extension to an executive's extension.
This command only applies to a ring group of type executive. Refer to
for more information.
Syntax Description
<number>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Functional Notes
This command is used in conjunction with the executive-extension command (refer to
executive-extension <number> on page
assistant's and the executive's phones will ring. If neither phone is answered (or both are busy or set to
do-not-disturb (DND)), the call is forwarded through the executive's call coverage list.
Usage Examples
The following example creates the executive ring group 1234 and causes both the executive (extension
4440) and the assistant (extension 4444) phones to ring when the executive extension is dialed:
(config)#voice ring-group 1234
(config-1234)#type executive
(config-1234)#executive-extension 4440
(config-1234)#assistant-extension 4444
60000CRG0-35E
Specifies the number of the assistant's extension.
Command was introduced.
3416). When the executive's extension is dialed, both the
Copyright © 2012 ADTRAN, Inc.
Voice Ring Group Command Set
type on page 3425
3409