ADTRAN AOS Version R10.1.0 Command Reference Manual page 3318

Command Reference Guide
set as-path prepend
Use the set as-path prepend command to prepend a number to the autonomous system (AS) path to
influence the best-path selection process by making the AS path appear further away. Use the no form of
this command to disable this feature. Variations of this command include:
set as-path prepend <number>
set as-path prepend last-as <number>
Syntax Description
<number>
last-as <number>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Usage Examples
The following example prepends the number 2 to the last AS path number:
(config)#route-map MYMAP permit 100
(config-route-map)#set as-path prepend last-as 2
60000CRG0-35E
Specifies a number to be prepended to the AS path value as an
autonomous number. Valid range is 1 to 65535.
Specifies a number to be prepended to the last AS path number. Valid range
is 1 to 10.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
3318