ADTRAN AOS Version R10.1.0 Command Reference Manual page 3214

Command Reference Guide
connect men-port efm-group <group id>
Use the connect men-port efm-group command to associate the Ethernet virtual connection (EVC) with a
specific Metro Ethernet network (MEN) port (Ethernet in the first mile (EFM) group) so that traffic can
flow to the MEN. Use the no form of this command to remove the association between this EVC and the
specified EFM group.
Syntax Description
<group id>
Default Values
By default, no interfaces are connected to the EVC.
Command History
Release A4.01
Functional Notes
Multiple EVCs can be associated with a single EFM group. The EFM group must be created before
associating the EVC and the group. For more information about configuring EFM groups, refer to
Group Command Set on page
Usage Examples
The following example associates EVC DATA with EFM group 1:
(config)#mef evc DATA
(config-evc-DATA)#connect men-port efm-group 1
60000CRG0-35E
Specifies the EFM group to associate with the EVC. Valid range is 1 to
1024.
Command was introduced.
2166.
Copyright © 2012 ADTRAN, Inc.
MEF EVC Command Set
EFM
3214