ADTRAN AOS Version R10.1.0 Command Reference Manual page 2970

Command Reference Guide
control timeout <value>
Use the control timeout command to set the Two-Way Active Measurement Protocol (TWAMP) control
session timeout value. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the control timeout value is set to 900.
Command History
Release 17.6
Usage Examples
In the following example, the TWAMP control session is set to timeout after 7200 seconds:
(config)#probe responder twamp
(config-responder-twamp)#control timeout 7200
60000CRG0-35E
Specifies the timeout interval in seconds. Range is 1 to 65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Responder Command Set
2970