ADTRAN AOS Version R10.1.0 Command Reference Manual page 3262

Command Reference Guide
<path>
http
https
<ipv4 address | hostname>
port <port>
path <path>
username <username>
password <password> Optional. Specifies that basic authentication credentials are sent with every
encrypted
tftp <ipv4 address>
Default Values
By default, no export location for the Pcap files is configured. When enabled, CompactFlash, flash, and
USB exports use the directory /PacketCapture by default. When enabled, HTTP, HTTPS, and TFTP
exports use the directory /adtran/pcash/aos/receiveCapture/ by default. When enabled, Pcap files are
sent to the default ports of 80 (HTTP), 443 (HTTPS), and UDP port 69 (TFTP).
60000CRG0-35E
Optional. Specifies a nondefault directory to store the Pcap files when they
are exported using CompactFlash, flash, or USB memory. If the optional
<path> parameter is not specified, files are exported to the /PacketCapture
directory by default. A specified path can be between 1 and 255 characters
in length. Remember that paths must be specified using / as the separating
character, they must be unescaped, and if they contain spaces, they must
be enclosed in quotation marks.
Specifies that the Pcap files are exported to a Hypertext Transfer Protocol
(HTTP) server.
Specifies that the Pcap files are exported to a secure HTTP (HTTPS)
server.
Specifies the IPv4 address or host name of the HTTP or HTTPs server to
which you are exporting the Pcap files. IPv4 addresses should be
expressed in dotted decimal notation, for example, X.X.X.X. Host names
can be between 4 and 255 characters in length, for example,
hostname.com.
Optional. Specifies the port on the HTTP, HTTPS, or Trivial File Transfer
Protocol (TFTP) server to which the Pcap files are sent. Valid port range is 1
to 65535. If no port is specified, the files are sent to the default port of 80
(HTTP), 443 (HTTPS), or UDP port 69 (TFTP). Multiple HTTP(S) exports in
the same packet-capture can have the same IPv4 address or host name as
long as a different port is specified.
Optional. Specifies the directory to which the Pcap files are exported. If a
path is not specified, the default request path of
/adtran/pcash/aos/receiveCapture/ is used.
HTTP(S) POST request. User names and passwords can be between 6 and
32 characters in length. User names cannot contain spaces, and if
passwords contain spaces, they must be enclosed in quotation marks (for
example, "open sesame").
Optional. Specifies that the password used in basic authentication for
HTTP(S) Pcap file export is encrypted.
Specifies that the Pcap files are exported to a TFTP server, and also
specifies the IPv4 address of that server. IPv4 addresses should be
expressed in dotted decimal notation, for example, X.X.X.X.
Copyright © 2012 ADTRAN, Inc.
Packet Capture Command Set
3262