ADTRAN AOS Version R10.1.0 Command Reference Manual page 2856

Command Reference Guide
deny <value>
Use the deny command to add an entry to the community list that denies Border Gateway Protocol (BGP)
routes containing the specified community number in the community attribute. Use the no form of this
command to remove the statement from the community list.
Syntax Description
<value>
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Usage Examples
The following example creates a community list named MyList to deny BGP routes that match the AS path
attributes 30:22:
(config)#ip as-path-list MyList
(config-as-path-list)#deny 30:22
60000CRG0-35E
Denies routes that contain this value in their community attribute. This is a
numeric value that can be an integer from 1 to 4294967295 or string in the
form aa:nn, where aa is the autonomous system (AS) number and nn is the
community number. Multiple community number parameters can be present
in the command.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
AS Path List Command Set
2856