Table of Contents
Advertisement
Command Reference Guide
sip domain-name <name>
Use the sip domain-name command to specify a Session Initiation Protocol (SIP) server domain name to
be supplied to requesting Dynamic Host Control Protocol version 6 (DHCPv6) clients served by this
DHCPv6 pool. Use the no form of this command to remove the server domain name from the pool. If no
server domain name is specified when using the no form of this command, then all SIP server domain
names are removed from the pool.
Syntax Description
<name>
Default Values
By default, no SIP server information is specified or sent to DHCPv6 clients.
Command History
Release 18.3
Functional Notes
Typically, the SIP server domain name is the domain name of the SIP outbound proxy server for the
DHCPv6 client to use.
Multiple domain names can be entered using multiple instances of this command. Each name is added or
deleted individually. Up to 50 domain names can be entered. These names are assigned in the order they
are entered. If the no version of this command is entered without specifying a domain name, all domain
names are removed from the pool.
Usage Examples
The following example adds a SIP server domain name to the DHCPv6 pool:
(config)#ipv6 dhcp pool MyPool
(config-dhcpv6)#sip domain-name Name1
60000CRG0-35E
The fully qualified domain name (FQDN) of an IPv6 SIP server, entered in
ASCII text of up to 256 characters.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
DHCPv6 Pool Command Set
3082
Advertisement
Table of Contents
