Router (Rip) Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
R (RIP) C
OUTER
To activate the Router (Routing Information Protocol (RIP)) Configuration mode, enter the router rip
command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#router rip
(config-rip)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect on page 67
do on page 71
end on page 72
exit on page 73
interface on page 74
All other commands for this command set are described in this section in alphabetical order.
auto-summary on page 3021
default-metric <value> on page 3022
distance <number> on page 3023
distribute-list <name> on page 3024
ipv6 policy-class <ipv6 acp name> max-sessions <number> on page 3026
network <ip address> <subnet mask> on page 3027
passive-interface <interface> on page 3028
redistribute bgp on page 3029
redistribute connected on page 3030
redistribute ospf on page 3031
redistribute static on page 3032
timeout-timer <value> on page 3033
update-timer <value> on page 3034
version on page 3035
60000CRG0-35E
S
OMMAND ET
Copyright © 2012 ADTRAN, Inc.

Router (RIP) Command Set

3020