Table of Contents
Advertisement
Command Reference Guide
default-information-originate
Use the default-information-originate command to cause an autonomous system boundary router
(ASBR) to generate a default route. It must have its own default route before it generates one unless the
always keyword is used. Use the no form of this command to return to the default setting. Variations of
this command include:
default-information-originate
default-information-originate always
default-information-originate always metric <value>
default-information-originate always metric <value> metric-type <type>
default-information-originate always metric-type <type>
default-information-originate metric <value>
default-information-originate metric <value> metric-type <type>
default-information-originate metric-type <type>
Syntax Description
always
metric <value>
metric-type <type>
Default Values
By default, the metric value is set to 10 and the metric type is set to 2.
Command History
Release 3.1
Usage Examples
The following example configures a router to always advertise default routes and assigns the default router
a metric value of 10000 and a metric type of 2:
(config)#router ospf
(config-ospf)#default-information-originate always metric 10000 metric-type 2
60000CRG0-35E
Optional. Specifies to always advertise default route.
Optional. Configures the metric value. Range is 0 to 16777214.
Optional. Configures the metric type. Select from type 1 or 2.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Router (OSPF) Command Set
2999
Advertisement
Table of Contents
