ADTRAN AOS Version R10.1.0 Command Reference Manual page 2862

Command Reference Guide BGP Command Set
Usage Examples
The following example creates an IPv4 AF on the default VRF instance and enters the AF's configuration
mode:
(config)#router bgp 100
(config-bgp)#address-family ipv4
(config-bgp-ipv4)#
The following example creates an IPv4 AF on the nondefault VRF instance named RED1 and enters the
AF's configuration mode:
(config)#vrf RED1 route-distinguisher ip 192.17.250.24:33
(config)#router bgp 100
(config-bgp)#vrf RED1
(config-bgp-vrf)#address-family ipv4
(config-bgp-vrf-ipv4)#
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2862