ADTRAN AOS Version R10.1.0 Command Reference Manual page 3456

Command Reference Guide
connect fxo <slot/port>
Use the connect fxo command to specify the physical interface this trunk will use for voice calls. Use the
no form of this command to remove this association.
Syntax Description
<slot/port>
Default Values
By default, no physical interface is assigned.
Command History
Release 9.3
Release 11.1
Usage Examples
The following example specifies this trunk to use port fxo 0/1:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#connect fxo 0/1
60000CRG0-35E
Specifies the slot/port for the foreign exchange office (FXO) trunk.
Command was introduced.
Command was expanded to include the analog voice trunk.
Copyright © 2012 ADTRAN, Inc.
Voice Analog Trunk Command Set
3456