ADTRAN AOS Version R10.1.0 Command Reference Manual page 3675

Command Reference Guide
seize-timeout <seconds>
Use the seize-timeout command to specify the maximum time the trunk will be seized before placing a
call. Use the no form of this command to return to the default timeout interval.
Syntax Description
<seconds>
Default Values
By default, the seize-timeout period is set to 30 seconds.
Command History
Release 15.1
Usage Examples
The following example sets the seize-timeout period to 20 seconds:
(config)#voice line sales
(config-sales)#seize-timeout 20
60000CRG0-35E
Specifies maximum number of seconds the trunk will be seized before
placing a call. Valid range is 5 to 120 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Line Account Command Set
3675