ADTRAN AOS Version R10.1.0 Command Reference Manual page 3440

Command Reference Guide
resource-selection
Use the resource-selection command to determine how the switchboard uses outbound call resources
contained within a time division multiplexing (TDM) based trunk group. Use the no form of this command
to disable this feature. Variations of this command include:
resource-selection circular
resource-selection circular ascending
resource-selection circular descending
resource-selection linear
resource-selection linear ascending
resource-selection linear descending
Syntax Description
circular
linear
ascending
descending
Default Values
By default, resource selection is set to linear.
Command History
Release 9.3
Release 13.1
Usage Examples
The following example specifies circular resource selection on the trunk TestGroup:
(config)#voice grouped-trunk TestGroup
(config-TestGroup)#resource-selection circular
60000CRG0-35E
Performs call load balancing among available DS0s/B-channels in this
trunk. Subsequent calls will be delivered to the next available
DS0/B-channel in a round-robin fashion.
Specifies that a call being delivered to this trunk will be accepted out the first
available DS0/B-channel available at the time the call is received.
Optional. Distributes calls in an order from the lowest to the highest channel
(DS0 1, 2, 3 through 24).
Optional. Distributes calls in an order from the highest to the lowest channel
(DS0 24, 23, 22 through 1).
Command was introduced.
Command was expanded to include the ascending and descending
subcommands.
Copyright © 2012 ADTRAN, Inc.
Voice Trunk Group Command Set
3440