Command Reference Guide
men-queue
Use the men-queue command to specify the output queue used by the Ethernet virtual connection (EVC)
for traffic that matches the EVC map. Use the no form of this command to return to the default setting.
Variations of this command include:
men-queue inherit
men-queue <value>
Syntax Description
inherit
<value>
Default Values
By default, matched traffic inherits the queue information.
Command History
Release A4.01
Usage Examples
The following example specifies that traffic matching EVC map Map1 is queued in output queue 4:
(config)#mef evc-map Map1
(config-evc-map-Map1)#men-queue 4
60000CRG0-35E
Specifies that the queue used by the EVC for matched traffic is based on
the Metro Ethernet network (MEN) priority setting (specified using the
command
men-pri on page
Specifies the queue to which the matched traffic is mapped by the EVC.
Valid range is 1 to 8.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
MEF EVC Map Command Set
3221).
3222