Command Reference Guide
name <name>
Use the name command to assign a name to the virtual local area network (VLAN). Use the no form of
this command to remove a name given to a VLAN.
Syntax Description
<name>
Default Values
By default, the name is set to VLANxxxx, where xxxx represents four numeric digits (including leading
zeroes) equal to the VLAN ID number.
Command History
Release 5.1
Functional Notes
The name is limited to 32 characters and must be unique throughout.
Usage Examples
The following example sets the name of VLAN 2 to Accounting:
(config)#vlan 2
(config-vlan 2)#name Accounting
60000CRG0-35E
Assigns a name to the VLAN using 1 to 32 characters.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VLAN Command Set
2693