ADTRAN AOS Version R10.1.0 Command Reference Manual page 3235

Command Reference Guide
description <text>
Use the description command to give a textual description to a Media Gateway Control Protocol (MGCP)
endpoint. Use the no form of this command to remove the endpoint's description.
Syntax Description
<text>
Default Values
By default, no description is given to an endpoint.
Command History
Release A2
Usage Examples
The following example gives the description of farendpoint to MGCP endpoint 1:
(config)#voice mgcp-endpoint1
(config-mgcp-1)#description farendpoint
60000CRG0-35E
Specifies the textual description of the endpoint.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
MGCP Command Set
3235