Table of Contents
Advertisement
Command Reference Guide
busy fxo <slot/port>
Use the busy fxo command to set a DS0 to busy so that no calls are allowed inbound or outbound. If a call
is active at the time this command is issued, the call will stay active until either party terminates the call.
Once terminated, the DS0 is set to busy. Use the no form of this command to disable this feature.
Variations of this command include:
busy fxo <slot/port>
busy fxo <slot/port> now
Syntax Description
<slot/port>
now
Default Values
No default values are necessary for this command.
Command History
Release 9.3
Release 11.1
Usage Examples
The following example sets FXO 0/1 to busy and terminates an active call when the command is issued:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#busy fxo 0/1 now
60000CRG0-35E
Specifies the slot/port for the foreign exchange office (FXO).
Optional. Immediately terminates active call at the time the command is
issued (for example, in the middle of a conversation).
Command was introduced.
Command was expanded to include the analog voice trunk.
Copyright © 2012 ADTRAN, Inc.
Voice Analog Trunk Command Set
3450
Advertisement
Table of Contents
