ADTRAN AOS Version R10.1.0 Command Reference Manual page 2745

Command Reference Guide
ip pim-sparse propagation-delay <value>
Use the ip pim-sparse propagation-delay command to specify the expected propagation delay for
join/prune messages. Set the propagation delay (in milliseconds) to estimate the amount of delay found in
the local link. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the propagation delay is set to 500 milliseconds.
Command History
Release 11.1
Usage Examples
The following example sets the propagation delay to 300 milliseconds:
(config)#interface vlan 1
(config-interface-vlan 1)#ip pim-sparse propagation-delay 300
60000CRG0-35E
Specifies the expected propagation delay in the local link in milliseconds.
Valid range is 0 to 32767 milliseconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VLAN Interface Command Set
2745