ADTRAN AOS Version R10.1.0 Command Reference Manual page 2705

Command Reference Guide
arp arpa
Use the arp arpa command to set ARPA as the standard Address Resolution Protocol (ARP) on this
interface. Use the no form of this command to return to the default setting.
Syntax Description
No subcommands.
Default Values
By default, the ARP is set to ARPA.
Command History
Release 5.1
Release 6.1
Usage Examples
The following example enables standard ARP for the virtual local area network (VLAN) interface:
(config)#interface vlan 1
(config-interface-vlan 1)#arp arpa
60000CRG0-35E
Command was introduced.
Command was extended to include the NetVanta 2000 Series units.
Copyright © 2012 ADTRAN, Inc.
VLAN Interface Command Set
2705