ADTRAN AOS Version R10.1.0 Command Reference Manual page 3298

Command Reference Guide
server <hostname | ip address>
Use the server command to add a predefined remote authentication dial-in user service (RADIUS) server
to the RADIUS server group for use with authentication, authorization, and accounting (AAA). Use the no
form of this command to remove the server from the group. Variations of this command include:
server <hostname | ip address>
server <hostname | ip address> acct-port <number>
server <hostname | ip address> auth-port <number>
Syntax Description
<hostname | ip address>
acct-port <number>
auth-port <number>
Default Values
By default, the accounting port is set to 1813 and the authentication port is set to 1812.
Command History
Release 5.1
Functional Notes
Empty RADIUS server groups are not saved. When the last server is removed from a group, AOS
automatically deletes the group.
If you choose to change the default authentication port for the RADIUS server, you can then create
multiple host entries for the same server. Server groups can have multiple host entries for the same server
as long as each entry has a unique identifier (an IP address and a UDP port). If you configure two host
entries on the same RADIUS server and are using both host entries for the same service (for example,
using both entries for authentication), then the second entry functions as a failover. RADIUS host entries
are tried in the order they are configured, so the failover entry is the second configured entry.
For more information about server groups, refer to the command
60000CRG0-35E
Specifies the server to add to the group. IP addresses should be expressed
in dotted decimal notation (for example, 10.10.10.1). If a host name is used,
a domain naming system (DNS) server should be learned by the AOS
device using Dynamic Host Configuration Protocol (DHCP), Point-to-Point
Protocol (PPP), or specified in the Global Configuration mode with the
command name-server on page
Optional. Specifies the User Datagram Protocol (UDP) port for AAA
accounting services with the RADIUS server being added to the RADIUS
server group. Port range is 0 to 65535. This command is reserved for future
use as currently AOS does not allow RADIUS servers for use with
accounting.
Optional. Specifies the UDP port for AAA authentication services with the
RADIUS server being added to the RADIUS server group. Port range is 0 to
65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
RADIUS Group Command Set
1270.
aaa group server on page 886.
3298