ADTRAN AOS Version R10.1.0 Command Reference Manual page 3596

Command Reference Guide
sip-server rollover
Use the sip-server rollover command to configure the rollover behavior of the Session Initiation Protocol
(SIP) server. Use the no form of this command to return to the default setting. Variations of this command
include:
sip-server rollover service-unavailable-or-timeout
sip-server rollover timeout-only
Syntax Description
service-unavailable-or-timeout
timeout-only
Default Values
By default, the sip-server rollover is set to timeout-only.
Command History
Release A2.03
Usage Examples
The following example sets the SIP server rollover to timeout-only:
(config)#voice trunk t01 type sip
(config-t01)#sip-server rollover timeout-only
60000CRG0-35E
Specifies the rollover to the next SIP server to occur after receiving a
503 Service Unavailable message or no response.
Specifies the rollover to the next SIP server to occur only after no
response is received.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
3596