ADTRAN AOS Version R10.1.0 Command Reference Manual page 3637

Command Reference Guide
rtp rx-gain <value>
Use the rtp rx-gain command to specify the Realtime Transport Protocol (RTP) receive (RX) gain or
attenuation. RTP is used to prevent static on voice connections by enhancing the quality of the packet
delivery. Using the no form of this command returns the RTP RX gain or attenuation to the default value.
Syntax Description
<value>
Default Values
By default, RTP RX gain is set to 0 dB.
Command History
Release A2.04
Command History
Release A2.04
Usage Examples
The following example specifies the RTP RX gain for trunk T01 is 4 dB:
(config)#voice trunk t03 type t1-rbs supervision fgd role user
(config-t01)#rtp rx-gain 4
60000CRG0-35E
Specifies the RTP RX gain or attenuation in the RTP to time division
multiplexing (TDM) direction. Range is 6 to -14. Negative values specify
attenuation. Positive values specify gain in decibels (dB).
Command was introduced.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice T1 Trunk Command Set
3637