Table of Contents
Advertisement
Command Reference Guide
trunk-number <number>
Use the trunk-number command to define the call routing when direct inward dialing (DID) is disabled.
This feature directs incoming calls to the specified number when DID is not present. This command also
allows users to activate different system modes of operation that redirect incoming calls to a different
number depending on the specified mode. Use the no form of this command to disable this feature.
Variations of this command include:
trunk-number <number>
trunk-number custom1 <number>
trunk-number custom1 no-number
trunk-number custom2 <number>
trunk-number custom2 no-number
trunk-number custom3 <number>
trunk-number custom3 no-number
trunk-number lunch <number>
trunk-number lunch no-number
trunk-number night <number>
trunk-number night no-number
trunk-number no-number
trunk-number override <number>
trunk-number override no-number
trunk-number weekend <number>
trunk-number weekend no-number
Syntax Description
<number>
custom1 - custom3
lunch
night
no-number
override
weekend
Default Values
No default values are necessary for this command.
Command History
Release 11.1
Release 15.1
Release 16.1
60000CRG0-35E
Specifies the number used for call routing when DID is disabled.
Specifies the custom mode to use.
Specifies the lunch-time mode.
Specifies the night-time mode.
Specifies no inbound calls are allowed on this trunk.
Specifies the override mode.
Specifies the weekend mode.
Command was introduced.
Command was added to the feature group D (FGD) trunk options.
Command was expanded to include the new subcommands.
Copyright © 2012 ADTRAN, Inc.
Voice T1 Trunk Command Set
3640
Advertisement
Table of Contents
