Command Reference Guide
BGP AF Neighbor Command Set
Usage Examples
The following example configures the BGP process to wait at least 100 seconds before sending updates to
this IPv4 AF neighbor on the default VRF instance:
(config)#router bgp 100
(config-bgp)#address-family ipv4
(config-bgp-ipv4)#neighbor 192.22.73.101
(config-bgp-ipv4-neighbor)#advertisement-interval 100
The following example configures the BGP process to wait at least 100 seconds before sending updates to
this IPv4 AF neighbor on the nondefault VRF instance named RED1:
(config)#vrf RED1 route-distinguisher ip 192.17.250.24:33
(config)#router bgp 100
(config-bgp)#vrf RED1
(config-bgp-vrf)#address-family ipv4
(config-bgp-vrf-ipv4)#neighbor 10.20.1.1
(config-bgp-vrf-ipv4-neighbor)#advertisement-interval 100
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2920