ADTRAN AOS Version R10.1.0 Command Reference Manual page 3319

Command Reference Guide
set comm-list <name> delete
Use the set comm-list delete command to specify a list of communities to delete. Use the no form of this
command to disable this feature.
Syntax Description
<name>
Default Values
No default values are necessary for this command.
Command History
Release 10.1
Functional Notes
A community list must be defined using the ip community-list command before the set comm-list delete
command can be used. Refer to
community list.
Usage Examples
The following example deletes the community list named LISTNAME:
(config)#route-map MYMAP permit 100
(config-route-map)#set comm-list LISTNAME delete
60000CRG0-35E
Specifies the name of the IP community list that contains the list of
community strings to delete.
Command was introduced.
community-list <name> on page 912
Copyright © 2012 ADTRAN, Inc.
Route Map Command Set
for information on configuring a
3319