ADTRAN AOS Version R10.1.0 Command Reference Manual page 3125

Command Reference Guide
vlans <vlan id>
Use the vlans command to apply a hardware access map to a virtual local area network (VLAN) interface.
Access maps can be applied to a single VLAN, a list of VLANs, or a range of VLANs. Use the no form of
this command to remove the access map from the specified VLAN(s).
Syntax Description
<vlan id>
Default Values
By default, access maps are not applied to any VLAN interfaces.
Command History
Release 17.6
Functional Notes
Once an access map has been created and associated with a hardware access control list (ACL), it must
be applied to a VLAN for the ACL or access map to be fully functional. Access maps can be applied to a
single VLAN or a range of VLANs, however, only one access map can be applied to a VLAN at a time. If
you attempt to apply a second access map to a VLAN, an error is displayed.
Changing hardware ACL or hardware access map configuration or application causes
new information to be reinstalled on the hardware. It is possible to run out of hardware
resources depending on how many resources are needed to apply the desired change. If
there are not enough hardware resources to install the new criteria in the hardware, an
error message is displayed. You can view the amount of hardware resources available
using the command
Usage Examples
The following example specifies that the access map Map1, which uses IP hardware ACL Trusted and
MAC hardware ACL Untrusted, is applied to VLANs 1,2, and 15-30.
(config)#hw-access-map Map1
(config-hw-access-map)#forward ip Trusted and mac Untrusted
(config-hw-access-map)#vlans 1,2,15-30
60000CRG0-35E
Specifies the VLAN(s) to which the access map is applied. Enter the single
VLAN ID for the map to apply to a single VLAN. Enter multiple VLAN IDs
separated by commas to apply the map to a list of VLANs (for example:
1,2,7,9). Enter multiple VLANs separated by dashes or commas to apply
the map to a range of VLANs (for example: 1-5,7-9).
Command was introduced.
show hw-filter-resource on page
Copyright © 2012 ADTRAN, Inc.
Hardware ACLs and Hardware Access Maps
518.
3125