ADTRAN AOS Version R10.1.0 Command Reference Manual page 3218

Command Reference Guide
connect
Use the connect command to associate the Ethernet virtual connection (EVC) map with an EVC
component. EVC maps must be associated with both an EVC and a user network interface (UNI) for the
map to function properly. Use the no form of this command to remove the association between the EVC
map and the EVC or the UNI. Variations of this command include:
connect evc <name>
connect uni mef-ethernet <slot/port>
Syntax Description
evc <name>
uni mef-ethernet <slot/port> Specifies the Metro Ethernet Forum (MEF) Ethernet interface (UNI) from
Default Values
By default, no EVC components are connected to the EVC map.
Command History
Release A4.01
Functional Notes
EVC maps are associated with both an EVC and a UNI (MEF Ethernet interface) to specify where the
traffic comes from as it is evaluated (UNI) and where it is mapped to if it matches the criteria outlined in the
map (EVC). Both variations of this command must be entered as separate commands for the EVC map to
function properly.
Usage Examples
The following example specifies that EVC map Map1 is associated with MEF Ethernet interface 1/1 and
with the EVC DATA:
(config)#mef evc-map Map1
(config-evc-map-Map1)#connect uni mef-ethernet 1/1
(config-evc-map-Map1)#connect evc DATA
60000CRG0-35E
Specifies the EVC to which the matching traffic is mapped.
which the traffic is evaluated.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
MEF EVC Map Command Set
3218