Command Reference Guide
domain <name>
Use the domain command to configure the assigned domain name for host messages. The domain is an
unique identifier for the Session Initiation Protocol (SIP) users on the trunk. Use the no form of this
command to disable this feature.
Syntax Description
<name>
Default Values
By default, no domain is configured.
Command History
Release 11.1
Usage Examples
The following example sets the domain name as home.com:
(config)#voice trunk t01 type sip
(config-t01)#domain home.com
60000CRG0-35E
Specifies the domain name for the SIP trunk commands.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice SIP Trunk Command Set
3547