ADTRAN AOS Version R10.1.0 Command Reference Manual page 2823

Command Reference Guide
protection-mode
Use the protection-mode command to configure the protection mode, type, and rate for an 802.11bg radio.
Use the no form of this command to return to the default value. Variations of this command include the
following:
protection-mode always
protection-mode always type cts-only
protection-mode always type cts-only rate 1
protection-mode always type cts-only rate 2
protection-mode always type cts-only rate 5.5
protection-mode always type cts-only rate 11
protection-mode always type rts-cts
protection-mode always type rts-cts rate 1
protection-mode always type rts-cts rate 2
protection-mode always type rts-cts rate 5.5
protection-mode always type rts-cts rate 11
protection-mode auto
protection-mode auto type cts-only
protection-mode auto type cts-only rate 1
protection-mode auto type cts-only rate 2
protection-mode auto type cts-only rate 5.5
protection-mode auto type cts-only rate 11
protection-mode auto type rts-cts
protection-mode auto type rts-cts rate 1
protection-mode auto type rts-cts rate 2
protection-mode auto type rts-cts rate 5.5
protection-mode auto type rts-cts rate 11
This command is only available on the 802.11bg radio interface.
Syntax Description
always
auto
type
cts-only
rts-cts
rate
1
2
60000CRG0-35E
Protection mode is always on regardless of the presence of 802.11b clients.
Protection mode is automatically activated when an 802.11b client
associates with an 802.11g access point (AP).
Specifies clear to send-only (CTS-only) protection mode.
Specifies request to send-clear to send (RTS-CTS) protection mode.
Sets the packet rate to 1 Mbps.
Sets the packet rate to 2 Mbps.
Copyright © 2012 ADTRAN, Inc.
Radio Interface Command Set
2823