ADTRAN AOS Version R10.1.0 Command Reference Manual page 3617

Command Reference Guide
dnis-digits <value> prefix <number>
Use the dnis-digits prefix command to program the number of digits to be transferred inbound on the
specific trunk. Use the no form of this command to cancel the setting.
Syntax Description
<value>
<number>
Default Values
No default values are necessary for this command.
Command History
Release 12.1
Usage Examples
The following example sets the number of transferred dialed number identification service (DNIS) digits to
4 on trunk T01 and sets the prefix 555:
(config)#voice trunk t01 type t1-rbs supervision fgd role user
(config-t01)#dnis-digits 4 prefix 555
60000CRG0-35E
Specifies the number of digits to be transferred.
Specifies the number prefix to prepend to the transferred digits.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice T1 Trunk Command Set
3617