ADTRAN AOS Version R10.1.0 Command Reference Manual page 3365

Command Reference Guide
interval
Use the interval command to specify the minimum interval for which Top Talkers data is collected. Use
the no form of this command to reset the interval to the default value. Variations of this command include:
interval 5
interval 10
interval 15
If the interval is changed after Top Talkers has been enabled, all accumulated data will be
lost.
Syntax Description
5
10
15
Default Values
By default, the interval for Top Talkers data collection is set to 5-minute intervals.
Command History
Release 17.1
Functional Notes
When viewing Top Talkers data, the current interval displayed is the interval set with this command. As the
specified interval for data accumulation ends, the data is compiled into hourly, 24 hourly, and daily
readouts.
Usage Examples
The following example sets the interval for Top Talkers data collection to 10-minute intervals:
(config)#ip flow top-talkers
(config-top-talkers)#interval 10
60000CRG0-35E
Collects Top Talkers data at 5-minute intervals.
Collects Top Talkers data at 10-minute intervals.
Collects Top Talkers data at 15-minute intervals.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Top Traffic Command Set
3365