ADTRAN AOS Version R10.1.0 Command Reference Manual page 2851

Command Reference Guide
security wpa group-key
Use the security wpa group-key command to enable group key (broadcast key) rotation for the specified
virtual access point (VAP). Use the no form of this command to disable group key rotation. Variations of
this command include:
security wpa group-key
security wpa group-key change <minutes>
security wpa group-key change <minutes> membership-termination
Syntax Description
change <minutes>
membership-termination
Default Values
By default, group key rotation is disabled.
Command History
Release 15.1
Usage Examples
The following example enables wired WPA group key rotation on the VAP:
(config)#interface dot11ap 1/1.1
(config-dot11ap 1/1.1-bg)#security wpa group-key
The following example enables a 15-minute change of the group key and also enables the group key to
change any time a membership is terminated:
(config)#interface dot11ap 1/1.1
(config-dot11ap 1/1.1-bg)#security wpa group-key change 15 membership-termination
60000CRG0-35E
Enables a periodic change of the group key. Specify the number of minutes
between group key changes. Valid range is 10 to 600 minutes, with the
default being 30 minutes.
Optional. Specifies a change of the group key at the termination of any
membership association.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VAP Interface Command Set
2851