Table of Contents
Advertisement
Command Reference Guide
VLAN Database Command Set
reset
Use the reset command to discard all changes made and revert to the previous configuration. The prompt
remains in the virtual local area network (VLAN) database.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this setting.
Command History
Release 5.1
Command was introduced.
Functional Notes
The reset command discards all changes to the VLAN configuration. The configuration remains the same
as it was prior to entering the VLAN Database Configuration mode (or since the last time you issued the
apply command). The VLAN database reverts to the same state it had upon entry. Refer to the command
apply on page 2697
for more information.
Usage Examples
The following example resets the unit to the previous configuration (i.e., the last configuration saved using
the apply or the exit command):
(config)#vlan database
(vlan)#reset
VLAN configuration has been reset.
(vlan)#
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2698
Advertisement
Table of Contents
