ADTRAN AOS Version R10.1.0 Command Reference Manual page 3031

Command Reference Guide
redistribute ospf
Use the redistribute ospf command to advertise routes from one protocol to another, regardless of the
routing protocol implemented on the routing domain. Using the ospf keyword allows the propagation of
open shortest path first (OSPF) routes into Routing Information Protocol (RIP). Use the no form of this
command to disable the propagation of the specified route type. Variations of this command include:
redistribute ospf
redistribute ospf metric <value>
redistribute ospf route-map <name>
Syntax Description
metric <value>
route-map <name>
Default Values
By default, this command is disabled.
Command History
Release 3.1
Release 14.1
Functional Notes
Redistributing OSPF routes imports those routes into RIP without the interfaces in question actually
participating in RIP. The OSPF routes imported this way are not covered by a network command and do
not send/receive RIP traffic. This allows RIP to distribute routes for networks that are not participating in
this RIP network.
If redistribute ospf is enabled and no metric value is specified, the value defaults to 0. The metric value
defined using the redistribute ospf metric command overrides the default-metric command's metric
setting. Refer to default-metric <value> on page 3022
Usage Examples
The following example imports OSPF routes into RIP:
(config)#router rip
(config-rip)#redistribute ospf
60000CRG0-35E
Optional. Specifies the hop count to use for advertising redistributed OSPF
routes in RIP.
Optional. Specifies the route map filter to use for advertising redistributed
OSPF routes in RIP.
Command was introduced.
Command was expanded to include the route map filtering.
Copyright © 2012 ADTRAN, Inc.
for more information.
Router (RIP) Command Set
3031