ADTRAN AOS Version R10.1.0 Command Reference Manual page 3275

Command Reference Guide
all
ipv6 rtp <port>
ipv6 rtp <begin port> <end port range>
protocol bridge
protocol bridge netbeui
protocol ip
protocol ipv6
vlan <id>
Default Values
No default values are necessary for this command.
Command History
Release 6.1
Release 17.2
Release 17.5
Release R10.1.0
Functional Notes
QoS policies are configured in the ADTRAN Operating System (AOS) command line interface (CLI) to
dictate the priority for servicing specified traffic types on a particular interface. QoS policies contain at least
one match reference (using the match command) and one or more action items (using the priority,
bandwidth, shape average, or set commands).
The match command specifies the criteria used when determining whether incoming traffic is a candidate
for the QoS policy action. Multiple match statements can exist within the same QoS policy, allowing a
single QoS policy to service various types of traffic. You can require all of the multiple conditions be met
(AND logic) by including the match-all parameter when creating the QoS policy. Alternatively, you can
choose to include traffic meeting any of the conditions (OR logic) by using the match-any parameter when
creating the QoS policy. Both of these conditions are explained in
1296.
Each listed match statement is handled independently by the processor. Entering too many
match statements in a QoS policy can burden the processor.
60000CRG0-35E
Optional. Specifies matching all UDP port numbers in the
specified range (even and odd). Valid only for ip rtp matches.
Matches IPv6 RTP packets with the specified UDP
destination port.
Matches IPv6 RTP packets with even UDP destination port
numbers in the specified range.
Matches frames being bridged by the router.
Matches only network basic input/output system (NetBIOS)
extended user interface (NetBEUI) frames being bridged by
the router.
Matches only IPv4 packets.
Matches only IPv6 packets.
Match packets associated with a particular virtual local area
network (VLAN). Indicate the VLAN ID number from
1 to 4095.
Command was introduced.
Command was expanded to include the any and vlan <id> options.
Command was expanded to include the fr-dlci <number> parameter.
Command was expanded to include the ip list, ipv6 list, ip rtp, ipv6 rtp,
protocol ip, and protocol ipv6 parameters.
Copyright © 2012 ADTRAN, Inc.
Quality of Service Map Command Set
qos map <name> <number> on page
3275