Command Reference Guide
Voice Analog Trunk Command Set
caller-id
Use the caller-id command to interpret and pass caller identification (ID) on this trunk. This information
usually displays the name, number, time, and date of the calling party. Use the no form of this command to
cancel the setting.
Syntax Description
No subcommands.
Default Values
By default, caller ID is disabled.
Command History
Release 10.1
Command was introduced.
Usage Examples
The following example enables caller ID:
(config)#voice trunk t01 type analog supervision loop-start
(config-t01)#caller-id
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3453