Table of Contents
Advertisement
Command Reference Guide
DHCPv4 Pool Command Set
Default Values
By default, the hardware address type is set to 10 Mbps Ethernet (1).
Command History
Release 2.1
Command was introduced.
Usage Examples
The following example specifies an Ethernet client with a MAC address of ae:11:54:60:99:10:
(config)#ip dhcp pool MyPool
(config-dhcp)#hardware-address ae:11:54:60:99:10 ethernet
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3053
Advertisement
Table of Contents
