Table of Contents
Advertisement
Command Reference Guide
num-rings
Use the num-rings command to specify the number of rings for call pickup before the system redirects the
call. Each system mode call coverage action can be configured with a different number of rings based on
preference. Use the no form of this command to return to the default setting. Variations of this command
include:
num-rings <value>
num-rings <system mode> <value>
num-rings override <value>
Syntax Description
<system mode>
override
<value>
Default Values
By default, the num-rings is set to 4.
Command History
Release 9.3
Release A1
Usage Examples
The following example sets the number of rings for this ring group to 6:
(config)#voice ring-group 1234
(config-1234)#num-rings 6
60000CRG0-35E
Optional. Specifies the system mode to configure for call coverage. Choose
from custom1, custom2, custom3, lunch, night, or weekend. Refer to
the Functional Notes of this command for more information on configuring
system modes.
Ignores the programmed system mode schedule.
Specifies the number of rings before the next action. Specify 0 through 9
rings. Entering 0 specifies an unlimited number of rings.
Command was introduced.
Command was updated to include the system mode feature options.
Copyright © 2012 ADTRAN, Inc.
Voice Ring Group Command Set
3422
Advertisement
Table of Contents
