ADTRAN AOS Version R10.1.0 Command Reference Manual page 3042

Command Reference Guide Desktop Auditing Local Policy Command Set
firewall enable
Use the firewall enable command to define the local desktop auditing policy to monitor clients' firewall
states. If the firewall is disabled or inactive, the client is a violator and its statistics will be collected. Using
the no form of this command removes firewall monitoring from the policy.
Syntax Description
No subcommands.
Default Values
By default, desktop monitoring local policies monitor all NAP information for each client.
Command History
Release 17.8 Command was introduced.
Usage Examples
The following example specifies that the local policy will monitor clients' firewall states:
(config)#desktop-auditing local-policy
(desktop-audit-policy)#firewall enable
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3042