Radius Group Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
RADIUS G
ROUP
The remote authentication dial-in user service (RADIUS) Group Command Set details how to create a
RADIUS server group and how to add servers to this group. Configured groups of RADIUS servers can be
created to be used as methods for authentication, authorization, and accounting (AAA) services in AOS.
These subsets are used when defining method lists for AAA actions and can keep you from having to
specify that all configured RADIUS servers are used for AAA.
To work with RADIUS server groups, AAA must be enabled. Refer to the command
for more information. Any RADIUS servers you want to add to the RADIUS server group must already be
configured before attempting to add them to the server group. For more information about configuring
RADIUS servers, refer to the commands
RADIUS server groups are first defined in the Global Configuration mode using the aaa group server
command. Entering this command allows you to create a group of RADIUS servers, and then enters the
RADIUS Group Configuration mode in order to add servers to the group. For more information about
creating a server group, refer to the command
For more information about configuring RADIUS server groups for use with AAA, refer to the
configuration guide Configuring AAA in AOS available online at https://supportforums.adtran.com.
To activate the RADIUS Group Configuration mode, enter the aaa group server radius <name>
command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#aaa group server radius RADAuthgroup
(config-sg-radius)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect on page 67
description <text> on page 70
do on page 71
end on page 72
exit on page 73
interface on page 74
shutdown on page 82
All other commands for this command set are described in this section in alphabetical order.
ipv6 policy-class <ipv6 acp name> max-sessions <number> on page 3297
server <hostname | ip address> on page 3298
60000CRG0-35E
C S
OMMAND ET
radius-server on page 1300
aaa group server on page
Copyright © 2012 ADTRAN, Inc.

RADIUS Group Command Set

aaa on on page 889
and radius-server host on page
886.
1302.
3296