Table of Contents
Advertisement
Command Reference Guide
Voice T1 Trunk Command Set
dialtone
Use the dialtone command to enable dial tone generation. Use the no form of this command to disable this
feature.
Syntax Description
No subcommands.
Default Values
By default, the dial tone is enabled.
Command History
Release 15.1
Command was introduced.
Usage Examples
The following example disables dial tone on trunk T01:
(config)#voice trunk t01 type t1-rbs supervision wink role network
(config-t01)#no dialtone
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3615
Advertisement
Table of Contents
