Table of Contents
Advertisement
Command Reference Guide
threshold
Use the threshold command to specify the criteria for a probe to be declared as passing or failing for the
delay, ipdv-abs, and packet-loss values measured by the probe. Any combination of direction and type of
threshold can be simultaneously configured and performed during the probe. Use the no form of this
command to return to the default setting. Variations of this command include the following:
threshold delay [in | out | round-trip] [avg | max | min] <fail value> <pass value>
threshold ipdv-abs [in | out | round-trip] [avg | max | min] <fail value> <pass value>
threshold packet-loss round-trip [avg | max | min] <fail value> <pass value>
Syntax Description
delay
ipdv-abs
in
avg
max
min
out
avg
max
min
round-trip
packet-loss
round-trip
avg
max
min
<fail value>
<pass value>
Default Values
By default, the delay pass and fail value is 2147483647 milliseconds, the ipdv-abs pass and fail value is
4294967295 milliseconds, and the packet-loss pass and fail value is 1000. This disables each of these
thresholds by default.
60000CRG0-35E
Specifies the thresholds for changing the state of the probe between pass
and fail based on the measured delay. The fail and pass value range is
-2147483648 to 2147483647 milliseconds.
Specifies the thresholds for changing the state of the probe between pass
and fail based on measured interpacket delay variation (IPDV). The fail and
pass value range is 0 to 4294967295 milliseconds.
Specifies inbound delay or IPDV.
Specifies the inbound average delay or IPDV.
Specifies the inbound maximum delay or IPDV.
Specifies the inbound minimum delay or IPDV.
Specifies outbound delay or IPDV.
Specifies the outbound average delay or IPDV.
Specifies the outbound maximum delay or IPDV.
Specifies the outbound minimum delay or IPDV.
Specifies round trip delay or IPDV.
Specifies the thresholds for changing the state of the probe between pass
and fail based on measured packet loss. The fail and pass value range is
1 to 1000 packets.
Specifies round trip packet loss.
Specifies the average round trip packet loss.
Specifies the maximum round trip packet loss.
Specifies the minimum round trip packet loss.
Specifies the probe's failing value. Refer to the specific threshold type
above for the valid range.
Specifies the probe's passing value. Refer to the specific threshold type
above for the valid range.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Command Set
2960
Advertisement
Table of Contents
