Command Reference Guide
page-timeout <seconds>
Use the page-timeout command to specify the amount of time page group users have to connect to the
page before the call is started. Use the no form of this command to return to the default value.
Syntax Description
<seconds>
Default Values
By default, the page timeout is set to 2 seconds.
Command History
Release A2.04
Functional Notes
If no connection is made before the timeout period expires, the paging call is terminated.
Usage Examples
The following example sets the page timeout to 5 seconds for the paging group using extension 8956:
(config)#voice paging-group 8956
(config-8956)#page-timeout 5
60000CRG0-35E
Specifies the time (in seconds) that users have to connect to a page before
information is transmitted. Range is 1 to 10 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Paging Group Command Set
3406