ADTRAN AOS Version R10.1.0 Command Reference Manual page 3004

Command Reference Guide
maximum-paths <value>
Use the maximum-paths command to specify the number of parallel routes (shared paths) open shortest
path first (OSPF) can inject into the route table. When IP load sharing is enabled, traffic is balanced to a
specific destination across up to six equal paths. Use the no form of this command to return to the default
value.
Syntax Description
<value>
Default Values
By default, the maximum-paths value is 4.
Command History
Release 11.1
Usage Examples
The following example sets the maximum number of multipath routes OSPF can insert in the route table
to 5.
(config)#router ospf
(config-ospf)#maximum-paths 5
60000CRG0-35E
Specifies the number of routes OSPF can insert into the route table. Valid
range is 1 to 6.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Router (OSPF) Command Set
3004