ADTRAN AOS Version R10.1.0 Command Reference Manual page 2841

Command Reference Guide VAP Interface Command Set
client-separation
Use the client-separation command to prevent wireless clients within this virtual access point (VAP) from
communicating directly with each other. Use the no form of this command to disable this feature, allowing
clients to communicate with one another. It is recommended to enable this command.
Syntax Description
No subcommands.
Default Values
By default, this feature is disabled.
Command History
Release 15.1 Command was introduced.
Usage Examples
The following example prevents wireless clients on this VAP interface from communicating directly with
each other:
(config)#interface dot11ap 1/1.1
(config-dot11ap 1/1.1-bg)#client-separation
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2841