ADTRAN AOS Version R10.1.0 Command Reference Manual page 3205

Command Reference Guide Mail Agent Command Set
capture header
Use the capture header command to specify that header information (ASCII demarcation and a
timestamp) is included when command output is captured. Use the no form of this command to remove the
header information from captured command output.
Syntax Description
No subcommands.
Default Values
By default, header information is included in captured command output.
Command History
Release 17.2 Command was introduced.
Usage Examples
The following example removes header information from the captured command output for mail agent
myagent:
(config)#mail-client myagent
(config-mail-client-myagent)#no capture header
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3205