ADTRAN AOS Version R10.1.0 Command Reference Manual page 2965

Command Reference Guide
type
Use the type command to specify a Hypertext Transfer Protocol (HTTP) request type. Use the no form of
this command to return to the default setting. Variations of this command include:
type get
type head
type raw
Syntax Description
get
head
raw
Default Values
By default, the probe's HTTP request is set to get.
Command History
Release 13.1
Functional Notes
This command can only be executed while in the probe <name> http-request command set.
Usage Examples
The following example configures probe1 to use HTTP request raw:
(config)#probe probe1 http-request
(config-probe-probe1)#type raw
60000CRG0-35E
Specifies the probe to use HTTP get request.
Specifies the probe to use HTTP head request.
Specifies the probe to use HTTP raw request.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Network Monitor Probe Command Set
2965