Command Reference Guide
vlan <vlan id> state
Use the vlan state command to change the state of the virtual local area network (VLAN). Use the no form
of this command to return to the default setting. Variations of this command include:
vlan <vlan id> state active
vlan <vlan id> state suspend
Syntax Description
<vlan id>
active
suspend
Default Values
The default setting is active (once the VLAN has been created).
Command History
Release 5.1
Usage Examples
The following example sets the VLAN state to suspended:
(config)#vlan database
(vlan)#vlan 2 state suspend
60000CRG0-35E
Specifies a valid VLAN interface ID. Valid VLAN ID range is 1 to 4094.
Changes the VLAN state to active.
Changes the VLAN state to suspended.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
VLAN Database Command Set
2703