ADTRAN AOS Version R10.1.0 Command Reference Manual page 3035

Command Reference Guide
version
Use the version command to specify (globally) the Routing Information Protocol (RIP) version used on all
IP interfaces. This global configuration is overridden using the configuration commands ip rip send
version and ip rip receive version. Use the no form of this command to return to the default value.
Variations of this command include:
version 1
version 2
Syntax Description
1
2
Default Values
By default, RIP is not enabled.
Command History
Release 1.1
Usage Examples
The following example specifies RIP version 2 as the global RIP version:
(config)#router rip
(config-rip)#version 2
60000CRG0-35E
Specifies RIP version 1 be used globally.
Specifies RIP version 2 be used globally.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Router (RIP) Command Set
3035