ADTRAN AOS Version R10.1.0 Command Reference Manual page 2822

Command Reference Guide Radio Interface Command Set
preamble-short
Use the preamble-short command to enable short preamble mode on an 802.11bg radio. The preamble is
information at the beginning of a packet that is used by the access point (AP), as well as its clients. Use the
no form of this command to return to the default value.
Syntax Description
No subcommands.
Default Values
By default, short preamble mode is enabled.
Command History
Release 15.1 Command was introduced.
Functional Notes
When short preamble mode is enabled, clients may request short or long preambles according to need.
Disabling short preamble mode means that clients must request long preambles only.
Short preamble mode is not supported on the 5 GHz 802.11a radio.
Usage Examples
The following example enables short preamble mode on an 802.11bg wireless radio:
(config)#interface dot11ap 1/1 radio-type 802.11bg
(config-dot11ap 1/1-bg)#preamble-short
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2822